by Stefan Wyeth | 3,6 / 5,0 | Approximate reading time: 4 Minutes
Digital converters

Why are digital converters the most important part of your studio?  ยท  Source: RME

ADVERTISEMENT

There is a wealth of information about digital converters available online, but only a small portion contains practical knowledge that you can use to your benefit. We’re going to take a closer look at AD/DA conversion and find out more about why it’s so crucial in the recording process.

ADVERTISEMENT

We’ll discuss some key aspects of conversion within the context of your audio workflow and include some resources for those who want to delve deeper into the theoretical background from the perspective of data encoding or electronics.

Where do we use digital converters?

In high-end professional studios, engineers often make use of multiple converters for different tasks and workflows. In some cases, they might use a separate multichannel AD converter for tracking, another multichannel DA converter for mixing, a stereo DA converter for monitoring, and a further stereo AD converter for printing mixes.

However, most of us work almost entirely in the box and have only ever used conversion stages out of pure necessity. As great as the audio quality is of current DAWs and plug-ins, if you’re looking to incorporate outboard gear into your workflow then the quality of your AD/DA conversion stages matters.

Resolution and Sample Rate

Converter resolution determines the dynamic range of the signal being digitized. We refer to this in bits at the smallest incremental voltage that can be recognized from any changes in the output signal.

The sample rate of a digital system is the measurement of samples per second. If you’re using several digital devices with your DAW, one of these must act as the master clock to send sync to the rest of the chain and ensure the sample rates are aligned.

Although most audio interfaces are equipped with internal clocking, you’ll require one with BNC and a digital port (see Digital formats and protocols) to expand your system with more channels.

ADVERTISEMENT
Ferrofish Pulse16
Ferrofish Pulse16
Customer rating:
(39)
Apogee

Apogee converters were extremely popular in the 1990s.

Clocking and Jitter

While you can sync multiple devices to a single sample rate, only one can act as the master clock at any given time. Some devices offer more stable clocking than others, so use this to your advantage to get the best results.

Another aspect of digital clocking to consider with converters is Jitter. The higher the sample rate you’re working at, the more potential there is for sync errors to creep in between the devices in the clocking chain.

High-end converters offer extremely stable clocking solutions with ultra-low Jitter, enabling high-res conversion without the potential of the devices in the chain going out of sync.

RME ADI-2 DAC FS
RME ADI-2 DAC FS
Customer rating:
(109)

Digital formats and protocols

Converters come in all shapes and sizes. From stereo to multichannel systems, they are designed for different purposes. Let’s take a quick look at some of the available formats you’ll find and what they’re used for:

  • PCIe – these cards are installed inside your PC or external desktop casing
  • BNC – Word clock I/O is used to sync the sample rates between digital devices
  • AES3 – AES/EBU generally uses a specialized XLR cable to carry two channels of digital audio at up to 24-bit
  • S/PDIF – Carries two channels of uncompressed audio via coaxial (RCA or BNC connectors) or fiber optic cable (TOSLINK)
  • ADATCarries up to 8 channels of uncompressed audio via Lightpipe (TOSLINK)
  • MADI – Supports digital audio transfer via a coaxial or fiber-optic cable of 28, 56, 32, or 64 channels at 96 kHz and beyond
  • Dante – Delivers 24 and 32-bit multichannel audio at up to 192 kHz via ethernet

Buying AD/DA converters

A tip to remember when researching AD/DA converters and audio interfaces is that the best options are generally produced by specialist manufacturers. Brands like Apogee, RME, Ferrofish, Metric Halo, Lynx, Antelope Audio, Benchmark, Lavry, Merging Technologies, Prism, and Burl are mostly known for producing quality AD/DA converters rather than other audio equipment.

That’s not to say you can’t get great solutions from Avid, SSL, Neve, Crane Song, Rupert Neve Designs, Universal Audio, or Focusrite. However, companies that specialize in converter technology generally offer better support, firmware/drivers, integration, and compatibility. This is because they have years of R&D and market experience behind them as opposed to those with recently diversified product ranges.

Burl B80 Mothership

A high-end modular AD/DA rig at Haxton Road Studios

How do you use AD/DA conversion creatively in your workflow? Please let us know in the comments below!

Crane Song Interstellar
Crane Song Interstellar
Customer rating:
(2)

More about digital converters:

Videos:

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

*Note: This article contains affiliate links that help us fund our site. Donโ€™t worry: the price for you always stays the same! If you buy something through these links, we will receive a small commission. Thank you for your support!

Image Sources:
  • Apogee converters were extremely popular in the 1990s.: aucfree
  • A high-end modular AD/DA rig : Scott C Wood
Digital converters

How do you like this post?

Rating: Yours: | รธ:
ADVERTISEMENT

4 responses to “Why are digital converters the most important part of your studio?”

    Ab says:
    5

    In a way they areโ€ฆ but itโ€™s also the component with the worst improvement per dollar in the entire studio.

    Entry level converters are perfectly capable, and beginners/intermediate user shouldnโ€™t spend thousands of dollars on a new one. They just wonโ€™t notice any difference

      grrrz says:
      -1

      Yes basically get a decent sound interface and if you can afford it an RME. After that you’ll be set for a while before needing discrete converters

    Prob says:
    0

    Apogee’s Symphony MKII, is probably the best option for an all in one solution. new interfaces and ad/da converters still spec below it almost 10 years later

Leave a Reply

Your email address will not be published. Required fields are marked *