by Stefan Wyeth | 4,9 / 5,0 | Approximate reading time: 4 Minutes
Leveling Amplifiers

Why do we still use leveling amplifiers during the recording process?  ยท  Source: Peter Palmer / Unsplash / Retro Instruments

ADVERTISEMENT

So what exactly are leveling amplifiers? Is it just a fancy word for a compressor? Well yes, but there is slightly more to it than that.

ADVERTISEMENT

Levelers are compressors that adjust the gain of a signal automatically according to the input level. They generally have fixed ratio, attack, and release settings which may sound rather limiting(pardon the pun).

Why do we still use leveling amplifiers?

However, the reason these famous designs are still relevant today is because of the incredibly musical results they produce. Levelers use various topologies such as tube, optical, variable-MU, FET, and sometimes a combination of multiple circuitry types.

You can find many different variants on the market in formats such as rack-mount, 500 series, and software plug-ins. Each has certain benefits and can be extremely useful for tracking and mixdown, particularly when working in the box.

Some designs aim to mimic and exceed the sonic quality of the classic levelers, while others might borrow from the basic blueprint with the aim of creating more versatile tools for today’s recording process.

Opto-controlled leveling amplifiers

Optical compressors and limiters use a Light Dependent Resistor(LDR) to regulate the dynamics of a signal. This process is non-linear and it is neither fast-acting nor particularly precise. However, it is the very reason they are so sought after for tracking and mixing.

The resultant compression happens in an extremely natural and musical way. Listen carefully and you’ll find that even when high gain reduction is applied, the dynamics and character seem to remain preserved. This astonishing phenomenon is why optical compressors continue to be used to this day as one of the most coveted recording tools.

ADVERTISEMENT

Bill Putnam’s Teletronix LA-2A from the early 1960s is arguably the most singular example of an optical leveling amplifier that has since inspired many other great designs. They are especially well-suited for vocals, guitars, mix bus, and even mastering purposes.

Optical leveling amplifier

Tegeler’s Vocal Leveler is a popular choice for tracking.

Here are some examples of opto-controlled leveling amplifiers in different formats:

Manley ELOP+
Manley ELOP+
Customer rating:
(3)

Tube-controlled leveling amplifiers

Tube levelers use vacuum tubes to control the gain of an input signal. Some designs may feature tubes at additional stages in the circuit or even a hybrid of tube and solid-state elements. While not typically as fast responding as VCA compressors, tube levelers are still faster than opto-controlled designs.

The compression happens through the re-biasing or remote cutoff of a tube. This means that the current rises and fades gradually, rather than instantaneously. Tube levelers are especially well-suited for vocal tracking, and have been used this way on our favourite recordings for over 60 years! They are also extremely useful for applying parallel compression.

Enhance your drum sub-mix, mix bus, overheads, or any signal with low-level nuances you wish to bring into focus. Famous tube levelers like the Gates Sta-level from 1956 and the Summit TLA-100 are still used extensively today.

Summit TLA-100A

The Summit TLA-100A remains the longest-standing continuously produced piece of outboard gear.

Here are some examples of tube-controlled leveling amplifiers in different formats:

WES Audio Timbre
WES Audio Timbre
Customer rating:
(1)

FET peak limiters

For the most part, FET limiting amplifiers or peak limiters are generally classed as compressors rather than levelers. However, because of their design and application as some of the most widely used set-and-forget compressors available, we can put them in a similar category. Feild-effect transistor or FET technology was a definitive move away from the use of vacuum tubes in the mid to late 1960s.

Bill Putnam’s iconic UREI 1176 LN went on to become one of the most essential recording tools ever produced to this day. FET compressors respond faster than optical or tube-controlled compressors. This makes them far more versatile and better suited for shaping transients.

Although they may not offer as wide a dynamic range as tubes, transistors bring their own coloration and texture to the sound. This makes 1176-style compressors useful in almost any application. Use it on vocals, guitars, bass, and drums.

Universal Audio 1176LN

Universal Audio reissued the 1176LN back in 2000.

Here are some examples of FET peak-limiting amplifiers in different formats:

Black Lion Audio Bluey Limiter
Black Lion Audio Bluey Limiter
Customer rating:
(13)

Which are your favourite applicationsย for leveling amplifiers? Please let us know in the comments below!

More about leveling compressors:

Videos:

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

* This post contains affiliate links and/or widgets. When you buy a product via our affiliate partner, we receive a small commission that helps support what we do. Donโ€™t worry, you pay the same price. Thanks for your support!

Image Sources:
  • Tegeler's Vocal Leveler is a popular choice for tracking.: Tegeler Audio
  • The Summit TLA-100A remains currently the longest standing continuously produced piece of outboard gear.: Summit Audio Inc.
  • Universal Audio reissued the 1176LN back in 2000.: Universal Audio
Leveling Amplifiers

How do you like this post?

Rating: Yours: | รธ:
ADVERTISEMENT

Leave a Reply

Your email address will not be published. Required fields are marked *