Focusrite Clarett+: The Clarett range of audio interfaces gets an update

09 Sep 2021 by Lasse Eilers | Approximate reading time: 2 Minutes

Focusrite Clarett+ USB Audio Interfaces · Source: Focusrite

Previous Next

Focusrite has announced the Clarett+ line of USB audio interfaces. While keeping the same configurations with two, four or eight microphone preamps, the Clarett+ series offers improved converters and preamps for higher fidelity, Focusrite says.

Focusrite Clarett+

About three and a half years after first introducing the Clarett USB audio interfaces, Focusrite has announced updated versions of the series. The new Clarett+ interfaces look exactly the same as their predecessors, but there are some significant changes under the hood.

: Clarett+ 2Pre

: Clarett+ 4Pre

: Clarett+ 8Pre

According to the manufacturer, the updated Clarett+ microphone preamps offer high headroom, low distortion and low noise. Needless to say, the Air mode that has become a standard feature of Focusrite interfaces is also included. This circuit emulates the ISA 110 mic preamp of the Focusrite Studio Console and adds clarity and presence, Focusrite says.

The A-D and D-A converters have also been updated and now deliver a wider dynamic range and less distortion than their predecessors. According to Focusrite, the line output dynamic range has been increased from 118 dB to 124 dB, while the line output THD-N is now -106 dB, compared to -103 dB on the previous generation Clarett USB interfaces. Focusrite also says that the headphone outputs have been improved for a more powerful and transparent sound.

: Clarett+ 2Pre

: Clarett+ 4Pre

: Focusrite Clarett+ 8Pre

As before, the Clarett+ is available in three versions. The Clarett+ 2Pre offers two preamps and a total of ten input and four output channels. The Clarett+ 4Pre doubles the number of preamps and can handle 18 input and eight output channels. And finally, the rack mount Clarett+ 8Pre has eight preamps and offers 18 input and 20 output channels.

All Clarett+ audio interfaces offer a USB-C connection, but only the 2Pre can be bus powered. All devices in the range have MIDI In/Out and an ADAT optical input, to which you can connect an external converter, such as the Focusrite Clarett OctoPre. As the top-of-the-line interface, the Clarett+ 8Pre adds an ADAT optical output and a word clock output.